0 Comments
Viewing single post of blog Karart Blog

I have decided to display the bronze figure as part of my assessment pieces so I am going to make a plinth to stand it on. I have found some board at home to use and with help have cut it into pieces that will give me a plinth that is 1metre high x 20cm square top. I glued and screwed it together, used wooden blocks inside in the top and bottom corners to hold it square. I filled over the top of the screws and down the rough sides of the, now just the sanding and painting to go.

Kathryn Raffell, 2015, building wooden plinth, 100cmx20cm sq.

Just to top coats of paint to go, then I’ll see if its good enough to use!


0 Comments